The Principles of Operant Conditioning

Description of a Restaurant To conduct the observation and examine the relations between parents and children according to the principles of operant conditioning, one of the McDonald’s restaurants was chosen. The observation was conducted on February 28, 2013. The time of the dinner was selected to have the opportunity to observe as many parents with children as possible.Advertising We will write a custom essay sample on The Principles of Operant Conditioning specifically for you for only $16.05 $11/page Learn More The fast food restaurant has the large dining area which is divided into several blocks. To observe adults and children during their interactions, the most open area in the dining hall was chosen. It was also possible to see the cash register from the place for observing the subjects. Three Observations Positive reinforcement for desired behaviors. I observed the young Caucasian mother with the five or six years old daughter who were d ining at the table in the corner of the restaurant. The girl hesitated whether to drink or not the portion of the milk cocktail. The mother said that they had already paid for the cocktail. The girl decided to drink the whole portion of the cocktail. The mother encouraged the desired behavior with a smile and a praise, stating that her daughter was a good girl, and it was really better to drink and eat the whole portions ordered. Positive punishment for undesired behaviors. The Caucasian father in his thirties and a schoolboy (8-9 years old) were observed. The father and his son were standing at the cash register. The boy was capricious and asked the father to buy the big portion of ice-cream instead of a small one. The man did not pay attention to the boy’s words. The boy started to ask louder. The father asked the boy to be calm. The boy decided to cry louder to draw the father’s attention. The father reacted rather angrily and almost shouted at the boy, paying atten tion to the boy’s inappropriate behaviour and impossibility to buy the large portion of the ice-cream. The boy was offended, but he stopped crying and asking for the ice-cream. Negative punishment for undesired behaviors. The family consisting of a young Asian mother and two girls was observed. The girls were five or six years old. The family was dining. One girl ate well and did not look aside. However, the other girl was involving in playing with a doll, and paid less attention to eating. When the first girl ate the portion and continued to speak with the mother, the other girl stopped to eat because of playing with the doll. The mother noted that the girl’s behaviour was inappropriate and decided to take the doll away to provide the girl with the opportunity to eat her dinner. Comments and Reflections According to the example of the positive reinforcement for the desired behavior, the mother did not misuse the positive reinforcer to accentuate the daughter’s appropriate behaviour. It is possible to speak about the further repeats of the discussed behaviour to be encouraged by the mother’s praise because it is one of the easiest but rather emotional variant of reinforcement. Basing on the further observation, I also focused on the mother’s usage of discrimination while reinforcing the daughter. Discussing the example of the positive punishment for the undesired behavior, I can state that the father did not fail to operate the principle, but he misused it because the extremely aggressive reaction as the form of punishment could provoke the boy’s being scared or even the repetition of the undesired behaviour instead of stopping it. In spite of the positive results of the punishment, it cannot be considered as appropriate for the situation under discussion. The mother of two girls depicted in the third example used the negative punishment for the undesired behavior effectively because the reaction of the daughter to th e punishment was the immediate stop of the negative action. The undesired behaviour was the play with a doll while eating, and it was stopped when the stimulus in the form of the doll was taken away. Thus, the principle of operant conditioning was used successfully. Describe Any Examples of Generalization or Discrimination Paying attention to the behaviours of the parents in relation to their children, I could not observe the examples of generalization when persons provide the same response to some similar stimuli.Advertising Looking for essay on psychology? Let's see if we can help you! Get your first paper with 15% OFF Learn More However, I observed the example of discrimination when the desired behavior and the desired response were associated with the reinforced stimulus (Coon and Mitterer 247). Thus, the girl depicted in the first example is inclined to react to the stimulus provided only by her mother because she is reinforced with a smile or a praise. I observed that the girl was reinforced to use a napkin when it was necessary because her mother paid attention to her appropriate or positive behaviour. Nevertheless, the other behaviours which could not be discussed as necessary or positive were ignored. Therefore, it is possible to state that the mother developed the situation of discrimination. Works Cited Coon, Dennis, and John Mitterer. Psychology: A Journey. USA: Cengage Learning, 2010. Print. This essay on The Principles of Operant Conditioning was written and submitted by user Count Nefaria to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Why you should go to college Essay Example

Why you should go to college Essay Example Why you should go to college Essay Why you should go to college Essay Matthew Baker 11/14/13 1st block Why You Should Go To College Why should you go to college? There are a lot of reasons for and against this question. Like how much will it cost or will I be more successful. College is necessary for a better future. First off college is necessary because it promotes discipline, maturity, and independence. More college students are successful in life because they have matured through college. They have four years with responsibilities that only high school graduates have not had. Having to get to classes without being late, having no parents to get them where they need to be, and having o manage their time to successfully graduate. College graduates have better opportunities than only high school graduates. They have more opportunities in the work force. They also dont make as much as college graduates you should go to college because it opens up a world of greatness for the person who get a masters or doctoral degree. Those degrees make a lot of difference in an interview and on a resume a degree looks great. Many people say that they would rather hire someone with a college degree rather than Just a high school graduate. College graduates have ore Job opportunities as in a Doctor or a Lawyer which make over six figures in their annual paychecks. This leads to a more prosperous life and possibly a happier and more successful life. Also the Doctors and Lawyers are widely respected in our society so that helps sometimes. Lastly, college education is becoming more of a requirement for Jobs. Every day more and more Jobs are becoming to where to get a job there you have to have at least a Bachelors or Associates degree. In my future my job requires a masters and a law degree but I would go for my Doctorate Just for the extra education. I believe you should go to college.

Personal financial mgmt Term Paper Example | Topics and Well Written Essays - 750 words

Personal financial mgmt - Term Paper Example †¢ The bank uses a single: maximum 25% of income for mortgage payments, property taxes and insurance test, rather than the double: maximum 28% of income for MPPI and maximum 33% of income for MPPI plus other monthly debt service Being a new employee of a large US corporation, you should create monthly personal balance sheets and projected budgets when selecting and enrolling in these plans. You will need appropriate financial goals based on age, marital status, current income and savings status. Do estimate your tax liabilities and select investments for a 401(k) retirement account is also important (â€Å"Investment Guide† 2013). Consider evaluating the health insurance options available to you. They include; Of the three different Bank of America health insurance plans available to you, it is more effective to use the consumer-directed plan (â€Å"Investment Guide† 2013). It is because, if anybody sheltered in your plan meets the family annual deductible, or two or more family members combine to reach it, they will pay the coinsurance rate. In case anyone sheltered under your plan meets the out-of-pocket maximum, or two or more people combine to meet it, 100% of the costs for all your family members on the plan are covered. The Comprehensive Traditional Plan is another option, but in it, coinsurance begins only for that person in your family who meets the individual annual deductible. Besides, suppose two people on the plan have costs, which combine to meet the family deductible, coinsurance begins for everyone on the plan. The consumer-directed plan still has the biggest benefit for you. Finally, you will need to monitor the progress of your chosen plan options. After making the investment choices, you must to evaluate frequently the performance of the plan investments to see if the finances allocated are still suitable for the portfolio. It will also help you know if there is a need to rebalance the accounts to match your desired asset

Developing Economies' Issues Essay Example | Topics and Well Written Essays - 1000 words

Developing Economies' Issues - Essay Example Less than half a century ago, many underdeveloped countries like Hong Kong, South Korea, and Singapore which were amongst poor nations of the world; have made rapid growth, flourished & now they are amongst the wealthiest nations of the world. This is all due to some economic reforms their governments have implemented in order to make their country a prosperous one. Any developed nation like the US, China, UK, Japan, Germany etc has such policymakers who focus on every possible ways to get strong economically. They focus on every aspect that can add up sustainability in the economy; like health, infrastructure, literacy & education, living standards, productivity etc. All these factors combine to form a solid economy & a successful nation. No doubt every nation wants that its economy should get stable & strong, but everyone is not like Chinese people who struggled very hard to achieve their goals & made a bench-mark in economical development. India is also one of the developing nations. More than 50% of Indians are poor, but their economy is getting stronger day by day. How is this all happening anyway? The answer is that more than half a population of Indians is suffering & sacrificing for their country.   People such as Indians who are mostly related to the agricultural sector suffer the most, as this sector receives the least income when the foreign investment is being made in cosmopolitan cities. The infrastructure is being rebuilt, the literacy level is increased in cities & there are more job openings in big cities as compared to the villages. Most labor comes from backward areas because there are very fewer opportunities in their own surroundings. Hence the labor force in villages decrease & ultimately this s ector fully vanishes. On the other hand, when the economy of any country gets strong enough, then it makes such imports which fulfill the needs of agriculture in the country. For example, the geography of the  US does not permit to have a large agriculture sector, but it imports all such things without burdening the economy or tightening taxes on the public. So every 3rd world country’s citizen should make sacrifices like those made by Indians, in order to make their country economically stable. At this time, India is highly suffering from the Kuznets factors; there is so much economic inequality in the society as the country is developing, but when India would be in the list of fully developed nations, this inequality will decrease when a certain amount of average income will be achieved.  

The Cost Accounting System of Bagalot PLC Coursework

The Cost Accounting System of Bagalot PLC - Coursework Example On the overall analysis, it can be stated that the cost system in Bagalot PLC is not appropriate and it requires certain changes. To justify this, light can be thrown on the findings of the internal team, which is appointed to study the overhead costs in both the plants. The findings can be summarised and demonstrated as follows: The above outcomes signify the importance of the production and post-production related activities. If the overhead cost of a product is calculated based on the production-run direct labor, then the other activities will be surely ignored. It implies that the adopted mechanism for the cost calculation is not effective as it takes into account only the partial costs. Based on the above explanation, it can be recommended to the Bagalot management to bring certain transformation in the host system or to change the method of the cost estimation. In this note, the management can be proposed to adopt ‘Activity-Based Costing’ (ABC). In this case, one question can crop up that whether both the plants should adopt the technique or not. It is true that variations in the activities are less in the Bath plant, but the mechanism of estimating overhead expenses is similar. Therefore, it will be better if ABC method can be applied to both the plants. There are several activities in Bristol plant and few activities in Bath plant. The activities are ‘receiving and production control’, ‘packaging and shipping’, ‘plant management and facilities’ and most importantly ‘set up labor’. By implementing ABC method, the organization will be able to monitor each activity that has a contribution in direct overhead. It will result in effective cost structure as well as transparent mechanism. In the last part, cost of each product of Bagalot has been calculated according to the activity-based costing method. In this portion of the paper, the profitability of the Briefcases based on the new approach (ABC method) will be computed. A comparative analysis of the old and new methods can be presented in a tabular format to figure out the best approach.

Developing of Online Enrolment System

Developing of Online Enrolment System Preface This software project management plan is intended to act as an outline of the development of a new honours system for Buena Vista College Administration. This plan will provide the structure and basis of the development of the new system. This includes outlining the deliverables, providing a schedule and organisational structure, and producing the associated plans needed for development of this project. This plan is intended to be used by the project team, as a development guide, throughout the life of the project, and by management as a reference to the details of the design as well as the progress of the project. 1.0 Project Overview The overview of the project provides a brief outline of the major details of the project, including identifying the project, stating what is expected form the project, and a summary of both schedule and budget. 1.1 Purpose, Scope Objectives The purpose of this project is to upgrade the existing enrolment system for Buena Vista College. The upgrade will consist of an added function, allowing administration staff to automatically compute students eligibility for entrance into honours programs. This new system will be integrated into the existing enrolment system. The project team will be restricted to adding the honours function only; fixing defects or adding other functionality is out of the scope of this project. The scope of the project does however include the implementation of any additional packaged software. The objective of this project is to meet the universitys business need of improving efficiencies, in order to lower operating costs and remain competitive. These needs are further defined below: v Overall quicker processing of applications to honour programs. Current methods are manual, making them both time consuming and prone to error. v A more effective handling of honors applications v Develop a readily accessible assessment report of current applicants v Develop a readily accessible honors entrance summary report 1.2 Assumption and Constraints There are several assumptions and constraints relating to the project team developing an honours system for Buena Vista College. They can be found in table 1.1 (below). Table 1.1: Assumptions, constraints and impacts Assumptions Impact on plan if false The group size will remain at five members through-out the life of the project The plan will need to be rescheduled to accommodate the change. Tasks will also have to be reallocated. The client has not specified a due date. The project will require heavy rescheduling, and possibly an outsourcing arrangement. The university will approve financing the system. The project will not go ahead. Client will be able to be contacted at all times May delay production, therefore extending the schedule. Constraints Impact on plan if false Project team is constrained by design of current administration system Project would be developed in a manner best suited to the project team. The plan would need to be recompiled, to conform to the new design. 1.3 Project Deliverables The following list specifies the elements of the project to be formally completed as a deliverable. A full list of both deliverable and non-deliverable work products is included in section 7.3. Table 1.2: Project Deliverables Statement of User Requirements and Acceptance Criteria Formally identifies the requirements of the system, specified by the client. This document needs to be reviewed and accepted cby the client. Software Project Management Plan Details the processes, tools and techniques that are to be used in the development of the project. User Documentation A manual for users clearly explaining system. System (Software) Formal hand over of new system to the client. 1.4 Schedule and Budget Summary The schedule and budget for this project is based upon the waterfall Software Design Life Cycle (SDLC) being adopted for this project. Table 1.3: Schedule and Budget Summary Phase Begun Finished Cost Requirements 04/11/2002 08/11/2002 $1,642.67 Analysis 11/11/2002 25/11/2002 $5,923.44 Design 26/11/2002 13/12/2002 $6,608.00 Coding 16/12/2002 03/03/2003 $36,216.00 Testing and Implementation 04/04/2003 25/04/2003 $6,308.31 TOTALS Project life is approx 125 days $56,968.42 The worst-case and best-case scenarios deviate less than 10% from the above summary. The full schedule and budget can be found in section 5.2.2 and 5.2.4 respectively, and in APPENDIX. 1.5 Evolution of the Project Plan This plan will be completed when it passes two criteria: v All elements of the Software Project Management Plan Template (Walden), are included in this document, and v The document passes a quality review, outlined in the Quality Assurance Plan (Section 7.4). At the completion of this document it will be labelled version 1.0 and shall be put under change control, whereby it may only be changed through the processes outlined in the Configuration Management Plan (Section 7.1). This process shall be made available to all members of the project team, as well as any member of management who requests it. Scheduled updates will be conducted at reviews undertaken at each milestone specified in the Project Reviews (Section 7.5). Unscheduled updates may be conducted at any stage during the development of the project, as long as the project manager approves changes. Regardless of whether the updates are scheduled or not, any change to this plan must comply with the change control plan outlined in the Configuration Management Plan (Section 7.1). 2.0 References Buena Vista College (1997) Configuration Management Plan v2.0, Buena Vista College Press, LOCATION Buena Vista College (2001) Quality Management Plan v3.1, Buena Vista College Press, LOCATION Buena Vista College (1999) Verification and Validation Plan v1.2 Buena Vista College Press, LOCATION Buena Vista College (2002) Work Product Plan v4.0 Buena Vista College Press, LOCATION IEEE Computer Society (1999) Volume Two: Process Standards, IEEE Inc.: New York, U.S.A. Walden, J. (1999) Software Project Management Plan Template v3.0, Department of Information Resources. PMBOK Rout Hodgen (2002) lec notes ROUT CASE STUDY SCHWALBE ALAVI M 1999 RUDOPLH EBERHADT LEC NOTES ON ESTIMATING ADD STANDARDS REFERED TO IN THE SUPPORTING PROCESS PLANS ALPHABETISE REFERENCES. 3.0 Acronyms and Definitions The table below shows all acronyms used and their definitions, in alphabetical order. Table 3.1:Acronyms Definitions (Alphabetical) Acronyms Definitions BVC CMP Buena Vista College Configuration Management Plan BVC QMP Buena Vista College Quality Management Plan BVC VVP Buena Vista College Verification and Validation Plan BVC WPP Buena Vista College Work Product Plan Client Buena Vista College Administration COCOMO Constructive Cost Model COSMOS Software Cost Modelling System FPA Function Point Analysis IT Group Buena Vista College Information Technology Group PM Project Manager PPR Post-project Review Project Team Members of the IT Group working on the system QE Quality Engineer SDD Software Design Description SDLC Software Design Life Cycle SPMP Software Project Management Plan SRS Software Requirements Specification SURAC Statement of User Requirements and Acceptance Criteria System Buena Vista College Administration honours system being developed by the project team TD Test Documentation TP Test Plan UD User Documentation 4.0 Project Organisation Project organisation involves identifying the external and internal interfaces as well as the roles and responsibilities of each member of the project team. 4.1 External Interfaces External interfaces summarise the relationship between the project team, the client, and any other entities associated with the project. This project does not have a true external interface existing between two parties, as both the acquirer and developer are part of the same larger organisation. The project shall exist in an environment separated from non-university bodies. The following table highlights the project teams organisational interactions and the interface/ liaison to each organisation. Table 3: External interfaces Organisation Role/s Interfaces with Project Team Develop of system Client IT Department IT Department Oversee project at highest level Client Project Team Buena Vista College Client; Managerial superior of IT dept and project team Project Liaison interfaces with Project Team IT Dept The Project Manager will be responsible for interfacing with anything outside of the project team. This includes the client liaison, the IT Director, and any other external body. It is important to mention that the IT Director has strong personal interest in this project, as he wishes to prove to the university that the IT department is a capable body. We expect that he will impact heavily upon the interface between the client and the project. Buena Vista College are both the client, and organisational superiors to all involved in the project. 4.2 Internal Structure The internal structure of Buena Vista College outlines the managerial hierarchy of the project team, identifying whom each member is reportable to. The structure also distinguishes the other known elements of the organisation, and their relation to each other. 4.5 Roles and Responsibilities The following table identifies the roles of each person in the team, and the subsequent responsibilities related to that role. Table 4: Roles and responsibilities Role Responsibilities Project Manager * conflict resolution * task allocation * project monitoring and improvement * project team leadership * liaise with both client and superiors Quality Engineer * review all deliverables for quality * produce quality plan * system testing System Analyst/ Designer * analysis * design * testing Programmers * coding * source code documentation * testing 5.0 Managerial Process Plans This section contains the managerial plans that shall be employed during this project. These plans are all subject to change and improvement. The plans have been created using both external knowledge, and personal judgement. External knowledge used includes IEEE standards and the PMBOK guide. 5.1 Start-Up Plan The projects cost and schedule shall be determined by how much effort will be required for this project. In order to determine the effort, the system size must be estimated. This shall be done using function-point analysis (FPA), and Constructive Cost Model (COCOMO) analysis. 5.1.1 Measuring System Size The FPA will yield an approximation to the systems size, which includes an estimate to the number of lines of code required. The FPA will be based upon the statement of user requirements; all data requirements, functions, and reports shall be approximated based upon the users specifications. Please be aware that the FPA is executed after the user the requirements have been gathered, and that the project has already begun. 5.1.2 Measuring Effort Required and Determining Schedules Measuring the amount of effort needed for this system can be measured in terms time required. Because the FPA provides an approximation to the size of the system, it can be used as the basis for measuring time required. Accordingly, the FPA results will be fed into a COCOMO analysis. Again, please be aware that this analysis is done once the project has begun, and does not include the effort required to gain, study, and synthesise the user requirements. The COCOMO analysis shall provide an estimate on the amount of time required to complete the project. The time required shall be displayed in a three phase breakdown; design, programming, and integration and testing. These phases shall then be broken down into activities, which shall be further broken down into tasks. Effort/time required for activities will be guided by the estimate provided in the COCOMO analysis. These estimations will be based upon the outlines given in section 7.2 of the PMBOK (Cost Estimating). In turn, the effort/time required for tasks shall be based upon the estimate for the activity that the task is part of. The COCOMO analysis has only been used to determine the effort required from schedule task 2.2 (Process Implementation), to schedule task 5.3 (Configuration Evaluation). To be more specific, the COCOMO product design phase includes section 2.2 to 3.2; the COCOMO programming phase includes all of section 4; and COCOMO integration and testing phase includes all of section 5. The schedule may be found in Appendix. A diagrammatic mapping the breakdown of work, or Work Breakdown Structure (WBS), is included in APPENDIX. The WBS shall then be used to calculate the project schedule, shown in APPENDIX. 5.1.3 Measuring Project Cost Cost is associated with three key indicators, size, quality, and productivity (Rudolph, 2002, p9). Unfortunately quality and productivity are too difficult to measure. Because system size can be measured in terms of effort, which is measured in terms of time, the hours required to complete the effort tasks can be translated to money (As staff pay can be calculated hourly.). By looking at the schedule, a monetary value shall be assigned to each resource used, eg. staff, hardware, training, etc. 5.1.4 Tools Employed in Calculating Size, Effort Cost The tool (application) that shall be used to conduct this analysis is known as COSMOS, created by East Tennessee Universitys Computer Science Department. The output of this application, the FPA, COCOMO, and Rayleigh Information, is shown in APPENDIX. The Rayleigh Information outputted by COSMOS shows how much time needs to be committed to the main building phase. 5.1.5 Staffing Currently, five staff are available for this project; one Project Manager, one Systems Analyst/Designer, one Quality Engineer, and two programmers. Not all staff will be required to work on the project at once. In the initial phase, the Project Manager and System Analyst are expected to do most work. As the project progresses more staffing shall be required. Programmers shall be employed during the intermediate phases, as well as a quality engineer. During this phase the project manager shall continue to manage and control the project, and the Analyst shall provide support, possibly in supporting areas such as process improvement. The Quality Engineer is likely to oversee the programmers, as well any processes that are subject to quality reviews. As the final phase is entered, the programmers shall be laid off, and also other staff, once their roles are no longer required. The project manager shall then hand over the completed product to the client. An approximation of the staff required through each phase is shown below. Detailed staffing schedules can be found in appendix. Table 5.1: Staff number and details by phase Phase Staff required Details Initial phase: Maximum 2 staff Project Manager Analyst Intermediate phase: Minimum 5 staff All staff Final phase: 1 or 2 staff Project Manager (Minimum) 5.1.5.1 Staff Sources The staff for this project will almost certainly come solely from the IT department. We doubt that contract personnel will be required for this project, as the IT group have more staff, which we expect to be free. If no additional internal staff available when the project requires extra staff, then contract personnel shall be considered. As all staff are familiar are with the development environment, we also doubt special expertise will be required. In the unexpected case that contract personnel are required, we shall approach an appropriate agency and seek the right person immediately. Little technical or managerial training will be required, as any contract staff must be experienced in the technical fields needed. Should the position be a managerial position, then managerial experience will be a prerequisite for such a job. 5.1.5.2 Staff Training All staff are currently familiar with the development environment so we do not expect that any technical training will be necessary. We do not know whether managerial training will be of benefit to the staff in this project, as such, no training will be provided. However, managerial process reviews shall be used in this project. These may uncover managerial weaknesses. Should this be the case, action shall be taken during the project, if feasible, otherwise, it shall be provided upon conclusion of the project. 5.1.6 Required Skills The client has specified a fairly basic system that is to operate in a Windows environment. Furthermore, the client stated that the system is a stand-alone system to run on one PC. Therefore, basic technical skills will be required. Our technical staff are certainly competent in such environments. Project management skills will also be required for this project, as well as knowledge in quality, and systems analysis and design. 5.1.7 Other Resources Required We do not expect any resources not already discussed in this document to be used. No additional hardware, facilities, contracts, or software is expected to acquired, both on the clients side and on the develop teams side. 5.2 Work Plan This section explains about work activities, schedule, resources, and budget details for the project. Some parts of the sub-section will refer to appendix or other sections. 5.2.3 Work Activities Waterfall model has been used to satisfy the requirement of BVC. Work activities involved in the work breakdown structure are: v Requirements v Analysis v Design v Coding v Testing v Project Management For a full description of their relationships and details, refer to section 6(technical plan) and appendix WBS. The acceptance criteria for the project lists the necessary task that are to be completed for the client to accept the product. A copy of the Acceptance Criteria is attached in section 6. Risk management processes relevant to these activities, including risk tracking, is included in section section 5.4 The relationship between a task and its predecessors and successors is illustrated in appendix msProject. 5.2.2 Schedule Allocation After establishing WBS, the tasks were entered into Microsoft Projectà ¢ 97, and the estimated schedule was created. This was completed by assigning a time period to each task. The schedule has been provided in the appendix msProject. 5.2.3 Resource Allocation Resource allocation assigns resources, as in staff and tools provided, to control activities within the WBS. These resources for each task are listed in section 6. 5.2.4 Budget Allocation Budget Allocation place a key role in any project. It estimates cost of resources and tools needed to conclude project activities. The budget for this project was calculated using Microsoft Projectà ¢ 97, using resource allocation, and expected pay-rates. A copy of the budget is provided in msProject. 5.3 Control Plan This section describes how the project will be monitored and controlled using the following plans. 5.3.1 Requirements Control Plan Any changes to the product requirements will be managed through the configuration management change control process, summarised in section 7.1. A requirements tracability matrix will be provided in all documents referencing the requirements, this will provide a direct link back to each requirement of the system. Impact analysis and change approval processes are described in Configuration Management, section 7.1. 5.3.2 Schedule Control Schedule control for this project will require inputs to control, control techniques, and outputs such as updates and corrections. The schedule will be monitored using the following inputs. v Project schedule: See Appendix for the project schedule. This will provide the basis for measuring and reporting schedule performance. v Performance reports: These reports provide information on schedule performance, such as whether deadline dates are being met or not. They shall also help the team stick to schedules, and alert us issues that may cause future problems. v Change requests: Schedule changes may be required to extend or shorten the project. Change requests for this project must exist formally as a document, and may originate internally or externally. A schedule control system shall use the above the inputs to manage changes to schedule. When changes to occur, additional planning must be done for compensation. A MS Project file will be updated to accommodate these changes. 5.3.3 Budget Control Budget control will be undertaken by the project manager, and include affecting any changes to the cost schedule, monitoring the cost baseline and determining any changes to the schedule and managing those changes. Changes to the budget schedule shall be influenced as much as possible by the project manager, to create the least effect on the plan. To monitor the budget, the project manager will receive periodic reports on the status budget, detailing what is under, over and on budget. Based on this information, Based on this information, the project manager will be able to assess any difference from the planned budget and determine if the variance is significant enough to require further investigation. If further action is required, then the type and extent is left to the project managers discretion, based on the particular case. Earned Value Management (EVM) will be used to monitor the budget compared to the amount of work completed. Through these techniques, the project manager will be able to determine if there are any changes to the schedule. If the schedule has changed, the project manager will need to reassess the schedule, taking into account these new developments. The project manager will also have to ensure that the changes to the budget will not affect the scope of the project by having to leave out some tasks due to budget constraints. Cost reporting of each task will be determined based on its size and budget. Large and expensive tasks will be reporting more frequently than small and cheap tasks. The period between reports is chosen by the project manager on a case-by-case basis. 5.3.4 Quality Control Plan The details of the Quality Control Plan are outlined in the Quality Assurance Plan, (section 7.4). The Quality Assurance Plan describes the measuring and controlling mechanisms used to assure the quality of the work processes and products. These mechanisms include audits, joint reviews, process assessments, and quality assurance of the processes. 5.3.5 Reporting Plan This plan highlights the reporting mechanisms, formats and frequencies of the reporting structure of the project. These relationships are displayed in table 5.2, below. Table 5.2: Reporting and Communication plan Communication From To Time Period Action plans Audits Minutes of meetings Risk Assessment Schedule checks Progress of assigned tasks All group members Project Manager Weekly 5.3.6 Measurement Plan All project measures, where not predetermined by either Buena Vista College, or any other external requirements, will be agreed upon by the project team based on the projects main issues. These details will be formally recorded in the Measurements Recording Form (Appendix #). The metrics used in the measurement plan will be collected at two processes in the development lifecycle, at the verification and validation processes, and at the end of the project. These measures will be collected mainly through interviews and reports at each of these times. The collected data will then be validated and stored by the project manager. 5.4 Risk Management Plan The risk management plan is designed for the development team to recognize any risk that may have a clashing affect to the projects schedule, budget and quality. The risk management covers the identification of risk factors, the assessment of the possible severity and likelihood of the risks, definition of management strategies for avoiding and containing risk, and the means for ongoing monitoring of the risk factors. 5.4.1 Risk Factors Identified Risk factors that were identified early in the project are listed below. During the life of the project the PM may find more risk factors that may affect the schedule and budget of the project. The PM will record each new risk factor in a Risk Identification Form (Appendix #). The risks presently identified are: v Conflict with team members v Staff skills and competence v Functional Rise v Conflicts with client/Customer v Low quality v Low productivity v Consistent to standards v Business Risks (absence caused by illness of accident of involved stakeholder.) v Loss of client. v New/Old technology conflicts. v Client Acceptance v Availability and use of Resources. 5.4.2 Risk Assessment Each risk factor identified was assessed on the likelihood and severity of it becoming an issue. Each assessment gave a value of 1 to 10, where 1 was low and 10 was high, indicating its importance. The assessment for each risk factor gave the reasons for the risk, impact of the risk, monitoring of the risk, and the resolution of the risk. With this detailed assessment of the risk factors a top ten risks identification and report was created. Also a risk matrix was created of each risks likelihood and severity. The project risks can be founding APPENDIX. 5.4.3 Risk Management Strategy Impacts of the risks on the project will be the cost, schedule and quality of the product. The PM must understand that risks are part of the day-to-day operations of the project. As part of the risk management strategy, the PM must conduct weekly reviews on the status of the current top-ten risks, and continually be aware of the development of any new risks. Any new risks identified must be formally recorded in a Risk Identification Form (Appendix #). Once identified, if in the top-ten, a risk has a contingency plan developed in case it becomes an issue, and is continually monitored. If a risk eventuates and becomes an issue, it will be recorded, its contingency plan will be started, and a group member will be assigned to handle the issue. These procedures are outlined in Issue Management, section 7.6. The PM must also be able to produce a report on the current status of the risks to any stakeholder if required. 5.4.4 Top Ten Risks Identification The top-ten risks identification highlights each risk and its details. It identifies each risks probability of occurring, 1 10(high), its severity and exposure (probability of occurrence * severity), the problem resolution technique, who is responsible for monitoring the risk, and the time period of the risk. Table 5.3: Top Ten Risks ID Item Prob Loss Exp Resolution Who Date 1 Conflicts with team members 6 8 48 Group Meeting PM Cont 2 Resource Availability 4 9 36 Reschedule PM Cont 3 Low Productivity 4 8 32 Inspection PM Cont 4 Consistent standards 5 6 30 Inspection PM Cont 5 Low Quality 4 7 28 Inspection PM Cont 6 Client Acceptance 4 7 28 Client meeting PM Hand -Over Phase 7 Conflict with Client 4 7 28 Client meeting PM Cont 8 Staff skill and competence 3 9 27 Training PM Cont 9 Functional Rise 2 9 18 Reschedule PM Cont 10 Absence of a stakeholder 2 9 18 Reschedule PM N/A Cont = Continuous (on -going) Below is example report kept by the PM to monitor risks in the project. The PM must have a current copy of the report. He must be able to show the report when requested by a stakeholder. Table 5.4: Risk Report Item Rank Now Last Time Time List Resolution Conflicts with team members 1 New 0 Have a group meeting. Resolve differences among the team members Resource Availability 2 New 0 Get more resources Low Productivity 3 New 0 Use Software process improvement methods. Consistent standards 4 New 0 Check QA plan. Low Quality 5 New 0 Design a Quality Model to achieve software quality standards Client Acceptance 6 New 0 Rework project until the client is satisfied. Conflict with Client 7 New 0 Talk with client and resolve issue Staff skill and competence 8 New 0 Train Staff Functional Rise 9 New 0 Redo Schedule for project. Absence of stakeholder 10 New 0 Redo Schedule for project. 5.4.5 Risk Matrix The risk matrix identifies the top-ten risks in terms of their likelihood of occurrence and severity. Items towards the top-left of the matrix are both probable and severe, and should be monitored carefully. Items towards the bottom-right are improbable and have a negligible impact on the project. Table 5.

Effects of Inflation Essay -- Economy Economics Money Essays

Effects of Inflation Inflation is the most commonly used economic term in the popular media. A Nexis search in 1996 found 872,000 news stories over the past twenty years that used the word inflation. "Unemployment" ran a distant second. Public concern about inflation generally heats up in step with inflation itself. Though economists do not always agree about when inflation starts to interfere with market signals, the public tends to express serious alarm once the inflation rate rises above 5 or 6 percent. Public opinion polls show minimal concern about rising prices during the early 1960s, as inflation was low. Concern rose with inflation in the late 1960s and early 1970s. When inflation twice surged to double-digit levels in the mid and late 1970s, Americans named it public enemy number one. Since the late 1980s, public anxiety has abated along with inflation itself. Yet even when inflation is low, Americans tend to perceive a morality tale in its effects. A recent survey by Yale economist Robert Shiller found that many Americans view differences in prices over time as a reflection of fundamental changes in the values of our society, rather than of purely economic forces. Economists think of inflation more plainly as a "sustained rise in the general level of prices." Their concerns focus on questions such as whether inflation distorts economic decisions. Very high inflation adversely impacts economic performance, as evidence from cross-country studies shows. Likewise, moderate levels of inflation can distort investment and consumption decisions. Recent U.S. experience with low, stable levels of inflation, in the range of 2 to 3 percent, has spurred policy makers to consider the possibility of achieving zero percent inflation. Reducing inflation however has costs in lost output and unemployment during the adjustment. Thus, an important question is wheth... ... would not allow massive inflation. Americans' feeling of pride in national institutions depends in part on low inflation or "sound money" as a signal of healthy fiscal and monetary institutions. Finally, inflation can discourage saving and encourage consumption. It thus is perceived as an attack on certain moral virtues -- a strong work ethic, deferred gratification -- that support a healthy economy. John Maynard Keynes made his famous attack on the Victorian virtue of saving -- always "jam tomorrow and never jam today" -- for economic reasons. Consumption in a depression or a recession could strengthen the economy, in his view. But British society took Keynes's mockery as an assault on the core of Victorian morality. Many Americans likewise feel that inflation assaults the legacy here of the Protestant work ethic that places a moral premium on saving over consumption. Fighting inflation thus is seen by many as a moral as much as an economic duty. Americans want their public officials to fight inflation to increase long-term output and employment but perhaps also to strengthen society's moral foundation.

Causes and Effects of Poverty

Causes and Effects of Poverty In the U. S. , there have been statistics that show that 15 to 25% of the population is living in poverty. Poverty is known as not being able to provide bare minimum requirements to survive, such as food and shelter. There are many causes that associate with poverty, that could include unemployment rates or people believe that some people are just lazy. The effects of poverty can be substantial. It effects people’s health, environment, and causes deprivations. The unemployment rate is still high today, which means there are people who still live in poverty.Some people are not just lazy; it just seems that it is difficult to find employment right now. Many people that are in poverty are because they did not continue their education after high school and many jobs are requiring degrees. Another reason some people are in poverty, is because they made mistakes in their past and when they try to make their life right they have difficulty finding employ ment. There are many reasons for poverty, but most of the causes are the unemployment rate. An effect of poverty is malnutrition.Malnutrition during infancy and childhood years can cause many great complications with development. Many children that suffer from malnutrition could have poor immune systems, developmental problems with their nervous system, or even brain damage. Compared to children that are not poor, children in poverty are two to three times more likely to have some sort of mental or physical disability from malnutrition. Children who grow up in poverty are also usually unlikely to finish their education. Many children in poverty are about 75 percent less likely to graduate high school than a child that is not poor.Even if a child that grows up in poverty does graduate high school, they are less likely to continue their education with college. As a matter of fact, less than four percent of children in the lowest quartile of family’s income do not graduate colle ge. In today’s world education is important. Many jobs today will not hire people without an education or even without a college degree. All in all, poverty is a big issue. It has been for a long time, just maybe one day the government will help fix the issue. It is not fair for all the children that live in poverty to suffer because their parents work so hard just to make ends meet.Education is the key to success these days, and we should all make sure our children are aware of that at a young age. Works Cited Chitranshi, Mansi. â€Å"Cause and Effects of Poverty. † Articles Wave (2009). Hill, Lewis E. â€Å"The Institutional Economics of Poverty: An Inquiry into the Causes and Effects of Poverty. † Journal of Economic Issues (1998): 279-285. Hunt, Matthew O. The Individual, Society, or Both? A Comparison of Black, Latino, and White Beliefs about the Causes of Poverty. September 1996. Lamson, John. â€Å"Exploring the Ecology of Poverty. † Human Ecology (2009): 4-9.

How power corrupts essays

How power corrupts essays When given power, many people use it in selfless manners because power tends to corrupt the people who posses it. These men and women may use their power to pull funds out of their respected countries that they rule in and use it for their personal welfare and finances instead of industrializing and advancing their nation. Others may become arrogant because of their power and not see the suffering of his or hers own people which they rule. The past and the present has supported Lords Actions statement that power tends to corrupt, and absolute power corrupts absolutely and can be clarified through many books, observations, and personal experiences. The best observation that can be made was what occurred in Iran under their new leader, Ayatollah Khomeini. He led a successful revolt on the government of the Shah of Iran in 1979. He sought along with all of his followers to purify Islam and purge all bad outside forces. When Ayatollah Khomeini was given the power to rule, many Western experts on Iranian affairs predicted that he would follow his promises and create a democratic nation. With his growing power, corruption had struck him causing him to change his idea of how he should rule. Instead of doing what most experts expected him to do, he turned the government back to what it was before (an autocratic regime) and removed all moderate leaders and political parties. The corruption, which he had then, caused him to be very arrogant. Only after being in power for a year, Saddam Hussein and his armies attacked the new autocratic regime of Iran and began the first gulf war. Millions of men and children fought from Iran w ith very poor weapons. Even with heavy losses and the growing amount of social unrest, the war kept ravaging on because Khomeini kept urging it to continue. The problem simply was that the weapons used by Saddam were more modern and more powerful than the outdated weapons used by the Iranian...

Marlene Dietrich Madonna and the Male Gaze essays

Marlene Dietrich Madonna and the Male Gaze essays Marlene Dietrich, Madonna, and the Male Gaze in Blonde Venus and Desperately Seeking for Susan As audiences, we subconsciously identify the male protagonists and take female as spectacle during the film watching, due to the social function of narrative films. (Turner 72)1 Thus feminists have been slashing the objection of female body in  ¡male gaze ¡ in the narrative films over the decades. Male gaze is in term of the fetishistic scopophilia and sadistic voyeurism. Fetishistic scopophilia deals with male visual control over females for the aesthetic presentation, which influence the presence of female body in films. And sadistic voyeurism is the erotic gaze in pains, which shapes the female characterization in films. Thus, the female characters in narrative films share the common pattern  ¡Ãƒ  beautiful and fragile, in other words, not intellectual and dependent on men. Nevertheless, Marlene Dietrich in Blonde Venus and Madonna in Desperately Seeking for Susan smash this pattern. They breaks the rule first by being the leading characters in films and such concentration of the female protagonist also means the depiction of male as peripheral to the plot. ( Turner 171)2 Another breaking-rule is their characterization different from the conventional female role. Marlene in the Blonde Venus as Helen Jones is intellectual and capable of men ¡s role of raising a family and Madonna ¡s role, Susan,  ¡plays ¡ with men, mentioned by Jimmy, Susan ¡s boyfriend. But the most alienated from the conventional female role in films is in their way of performing. And even though they all pose some challenge to male gaze, their ways of role-playing are at opposite poles. Their role-playing can discuss from the three elements to shape their characters, camera movement, mise-en-scene and the performance of star. The camera always shoots Marlene from a relative low angle when she ¡s with other male characters. ...

US rising debt level and current economic problems Essay

US rising debt level and current economic problems - Essay Example According to the forecast of the organisation for economic cooperation and development (2011), the budget deficit for US is likely to increase to 10% of the GDP. This projection means that the US government must formulate ways of arresting the looming economic crises as a result of the increasing deficits. The main reason why the public debt in America would increase is the need for the government to increase job opportunities by stimulating demand (Saad 2011). When a government intends to create more jobs, it will increase the level of demand by increasing its public expenditure and reducing the level of taxation. This had made the Obama’s government increase the level of public debt. At the same time, the 2008 economic recession could also be a reason for the increased budget deficit. After a recession, the economy of a country needs to be stimulated to increase the level of demand and to create more economic activities. This made the US government increased their level of b udget deficit to increase the rate of recovery of the domestic economy (Amadeo 2011). The increased expenditure from external borrowing accompanied by a decline in the level of taxation must result in an increase in the level of public debt. If not closely monitored, the increased public expenditure will result in increasing level of inflation making prices of goods soar in the market. The increased cost in recapitalization and acquisition of financial institutions as well made the public deficit soar (Turner 2008). One of the causes of the economic recession was failure by the financial institutions to act decisively to rescue the depreciation in the economy. The failure by the credit rating agencies to give true credit risks made banks increase their mortgage loans that in the long run led to the recession. The US government as a result of this ventured into takeover of some banks which therefore meant increase in government spending making the economy experience a rising level of deficit (Saad 2011). The increases government spending accompanied by the declining tax rates was bound to increase the level of debt and this makes the projections of OCED realistic and important for government formulation. It must also be noted that the increasing deficit has made the democrats and republicans have clashes on the measures that the government should undertake to help reduce the level of deficit and the general debt level (Saad 2011). The two parties have agreed collectively on the short term measures of a cut in the government spending but have failed to agree on which areas that the governments should reduce spending. They also have different thoughts on the long term remedial. To correct the economic problems in the economy, the government can pursue a significant reduction in the deficit level. The US government through such a move would be in a position to reduce their increasing debt level and at the same time solve other economic challenges. A reduction in t he level of budget deficit can be made for various purposes; the first reason for a reduced budget deficit would be to help reduce the level of government debt (International Monetary Fund 2010). For instance, the Obama administration projects that through the reduction in the government deficit for a decade would make the government solve the high level of debt (OECD 2011). Another reason for cutting the level of government deficit would be

Ghana Letters Essay Example | Topics and Well Written Essays - 2000 words

Ghana Letters - Essay Example The philosophy of this political party, as my cousin explained to me, was close to my ideas: independence from Ghana and social justice but with a dynamic form of resistance. In other words, it would be a nationalist party influenced from the ideas of socialism. I was really pleased to hear that and I stated my interest. In a few days, the 10th of June, I was present in the party’s establishment, being one of its founding members. Through the years, I tried to participate in as many meetings of the party as possible, supporting social activities, writing documents and organizing events. Through these public meetings local people had the chance to be informed on the progress of the country’s independency and on the party’s schedule for securing economic growth. Also, emphasis was given to the protection and enhancement of Ghana’s cultural and social identity. Because I have to respond also to my duties as a teacher my involvement in the party’s activities could not exceed the two-three hours on a daily basis. For years, my life was dedicated to inform people on Ghana’s potentials, as a nation, on the history of Ashanti, a population that has suffered a lot from colonialists and from the chances of Ghana to recover from economic devastation, as a result of its long-term occupation from colonialists. The power of Ghana’s culture and tradition had been significant help; G hanaians, being independent by nature, were willing to risk their live for securing the freedom and happiness of their children. All these efforts were terminated unexpectedly. It was the morning of 24 February of 1966 that police officers entered my apartment and arrested me. I had to pass a few years in jail, without specific category but just because of my participation in a political party. My participation in CPP offered to me valuable memories but also an important feeling: I know that I’ve done everything possible for helping my country to escape colonialism and to become